Rockwell ProGrade RK7122L 10-inch Compound Miter Saw with Laser

Cheap Rockwell ProGrade RK7122L 10-inch Compound Miter Saw with Laser Review

Ridgid MS1065LZA 28513 Saw, 10-Inch Compound Miter with Laser

Cheap Ridgid MS1065LZA 28513 Saw, 10-Inch Compound Miter with Laser Review

I can not say enough good things about this saw. I got it for about a month and it works perfectly within its boundaries. Set up was easy and adjustments have been there out of the box. 40T blade it comes with is hard on wood and dust bag does not really work (like most of them), but can be adapted to a vacuum. Easy to adjust and relatively compact. Laser works well, and throat zero clearance is nice. Finally, I want a 12 "double bevel, but I'll use it for a long period of time.reduction equipment more than I do are better done with a table saw anyway. Excellent tool like most Ridgid tools I used.

Makita LS1013F 10-inch Dual Slide Compound Miter saw with Light

Cheap Makita LS1013F 10-inch Dual Slide Compound Miter saw with Light Review

Bought this on Amazon in April 2006. He replaced my tank type 10 "miter saw Milwaukee - the most accurate tool I ever used so far Makita arrived. Every time I use this tool, I fell in love with her again . So I thought I "owed" it a good review. I am not a professional trader, craftsman, carpenter, etc. - just an owner who gets too excited sometimes so over my head. I take a lot of wood perfectly well and convert 'em to sawdust and thresholds - but now Ido it with a big smile and with more precision than I deserve. If I had to choose a word for this saw - one - it would be good.

No. Make that SMOOOOTH place.

Being able to bevel and miter of both sides gives me confidence to tackle difficult cuts. I find myself enjoying that "something extra" bit of trim and finish work on all the work - it gives me an excuse to practice with this saw. I do things I would not even bother to try, if I did not have this tool. InBesides cutting performance and accuracy, it proved very versatile in my small garage shop because I can swing the saw around the place of wood (usually cedar dimension). capcity Nice - 4x4 Stck cup or 2x4 on edge with ease. My most difficult compound cuts so far? Attic Vents building custom pinion and mounting the coverslip strips (45 degree angle) into a chamber octagonal. The math angle was a bit of a challenge (!) But once calculated, the reductions were easy toset up and run on this saw - and died. Yeah, I know what you think: "gable vents? Gable Vents! Problem ..." Me too - until I got these multiple angle end cuts.

The saw is well designed and built with quality. No problems of 3-1/2 years (it is true) occasional use. The blade is excellent, with reductions similar to those of my table saw blade Forrest. Even with the great Amazon - free shipping, too - it was the second most expensive tool I have everpurchased (after my table saw). But I have never regretted. Not once.

Vows: second retaining clip would be nice (mine came with a clamp and two extensions). I am moving the clamp to the "other" side frequently. Like most Makita tools, accessories and parts are easy to find so I'll probably soon be a catch. Cheers!

Factory-Reconditioned DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter Saw

Cheap Factory-Reconditioned DEWALT DW717 10-Inch Double-Bevel Sliding Compound Miter Saw Review

Oldham 100C460 SuperDuty 10-Inch 60 Tooth ATB Fine Finishing Saw Blade with 5/8-Inch Arbor

Cheap Oldham 100C460 SuperDuty 10-Inch 60 Tooth ATB Fine Finishing Saw Blade with 5/8-Inch Arbor Review

Makita LS1013L 15 Amp 10-Inch Dual Bevel Sliding Compound Miter Saw with Laser

Cheap Makita LS1013L 15 Amp 10-Inch Dual Bevel Sliding Compound Miter Saw with Laser Review

I had this saw for several months. It is a powerful but quiet SILKY SMOOTH saw right.

It is surprisingly high due to the drag functionality. I had to move my work bench to welcome him.

Make sure you have ENOUGH behind the saw.

I regretted my choice and wish I had gone with a bevel compound as the Dewalt 716 until I had to cut 2x12 last weekend. The Makita went through them as if they were so 1 / 4 "plywood conscoated with peanut butter.

WOW GREAT lumberjack!

Obviously a decent blade for the saw.

I really like the separate switch for the laser, I can use to align my cup without running the saw.

NO Why five stars?

Dust is not great. I put an adapter instead of the dust bag and attached my Shop Vac. It helped, but the system of an empty bench near the top of the blade protection is still needed or perhaps a scoop at the rear ofsaw attached to a real dust collection system.

My saw arrived with a broken lever bevel. It is only a part of $ 4, so I decided to order me rather than a problem with Amazon or anyone else. I also wanted optional accessories.

There is virtually no barrier on the right side of the blade. However, there is a factory option available is complementary closing a horizontal flange.

I went to a shelter nearby who seems to specialize in Makita where they have abig screen and they had representatives on the plant site several times in the past. When the salesman looked at the closing price of the attachment clip and they almost had to call 911 to restart my heart. Together, they cost more than 1/4th of the price of the new saw.

Even if I have a scandal for the bevel lever and attachment to the right fence.

The wait for the bevel lever was approx. one week. Good service, good price for a 3 "piece of plastic.
A few months later 2 + attachment closing never happened. I hope this is not so, I made a homemade setting that works, but is not, of course, so pretty. But the fact is quite as nice and about $ 5 per square inch of the fence is a Makita littttle expensive if it happens EVER.

This is a great saw, but it scares me to think what will or will not occur if the saw crashes and I have to wait an essential and very important! The letters S - O - L aheadmind.

DeWalt DW3215PT 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5/8-Inch Arbor and Tough Coat Finish

Cheap DeWalt DW3215PT 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5/8-Inch Arbor and Tough Coat Finish Review

This blade cuts more wood like butter in my cheapo miter saw. upgrade the blade huge stock. This oak a tear quite well and had much use while I built cabinets. It is very good at the end of tears with pieces too small or nonexistent on most tracks. My only intention was to use only the blade with the oak, then replace it.

But after doing its work involved, it is still Sharpe / right enough not to justify the replacement yet. I would most definitely useagain in a heartbeat.

Factory-Reconditioned Bosch 4405-RT 13 Amp 10-Inch Single Bevel Slide Miter

Cheap Factory-Reconditioned Bosch 4405-RT 13 Amp 10-Inch Single Bevel Slide Miter Review

Irwin Industrial Tools 14076 10-Inch 80-Teeth 5/8-Inch Arbor Miter and Table Saw Blade

Cheap Irwin Industrial Tools 14076 10-Inch 80-Teeth 5/8-Inch Arbor Miter and Table Saw Blade Review

I do most of my cut with the Porter Cable Variable 50 tpi saw. It works well, but does not answer on the plywood, often leaving small chips on the board. I just bought this blade Irwin particularly for plywood and the results are excellent. Very nice finish. (I made a zero clearance insert on the table saw for some time, probably contributing to the cons-plated cutting too.)

DELTA 36-225 10-Inch Compound Miter saw

Cheap DELTA 36-225 10-Inch Compound Miter saw Review

I had this saw for a couple of years. This is a great saw that has never been stuck or loss of power. The horizontal handle is superb. The blade is not bad either, but it took a little oak and some plywood pieces I recently cut. The only drawback is size. Recently, I had to cut some shelves that was 9 "wide, too big for the saw. I wish I had the 10" saw format (36-240). If you plan to keep your small sized projects it is an excellent saw. ! If youto larger projects, namely shelves, bookcases, etc., then invest in the Delta 36-240 Sidekick sliding miter saw. I also added a LaserKerf to mine, which is a big plus ... Overall, this saw is phenomenal for the price and I will continue to buy Delta.

Original 00122 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5/8-Inch Arbor

Cheap Original 00122 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5/8-Inch Arbor Review

The love of their 7 1 / 4, 51 / 2 "and is also good if, like me, you like narrow gauge, blades and floor, with flat plates balanced. Just select the correct number teeth to work, as well as the type of tooth.

Freud LU91M010 10-Inch 60 Tooth ATB Crosscutting Miter Saw Blade with 5/8-Inch Arbor

Cheap Freud LU91M010 10-Inch 60 Tooth ATB Crosscutting Miter Saw Blade with 5/8-Inch Arbor Review

I had a tear Freud blade on my table saw for a while and I was impressed. So when I'm tired of cutting my own SCMS (slide miter saw is dialed), I bought the Freud blade LU91M010 tooth 60 and cuts like butter. No tear it out and slid on the board. I upgraded from 40 blades DEWALT cut tooth was probably best suited for construction. (...) It is a very good deal compared to the forest. I do not because each version Tefloncomplains of doing nothing, but put Read painting on wood.

Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Cheap Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating Review

After 30 years it is the thin front kirf I used on my table saw (Delta Contractors Saw currently). I read about thin kirf a number of times, but an article I read recently and some 8 / 4 nuts that seemed to give my business has seen a heck of a workout convinced me I have to give it a try. I pulled a 4 / 4 Maple, walnut and Chery and I must admit, I bought one of those long ago. Entrepreneurs who had seen struggeled with 4 / 4 Maplecherry in the past, with what was good Gernal object or tooth combination blades 40 & 50 kirf regular, seems to have a new life. If I had been blindfolded and hands a piece of wood to tear I thought it is pine or poplar, maple sugar and no icing. The slides I used in the past have always been given the best players test blade leading journals in the world of woodworking, so it's not as if I am using the cheap, and they have always been strong . They have never cut this propertywhen ripping hardwood, the LU87R010 provided a surface much better and I actually went straight to the glue in place, something I could never do with other blades. I must admit I'm impressed. I always thought a good combination blade has been everything I had, and now I'm convinced this is the best blade for my saw for ripping. I think I'll get a dedicated cross-section blade and just make the transition every time I change the type of cut. Although I no longer intersects the cross on my cursor as if it istoo wide. I don't see how you can go wrong with this blade.

Porter Cable 12902 Riptide 10-Inch 80 Tooth ATB Thin Kerf Crosscutting Miter Saw Blade with 5/8-Inch Arbor

Cheap Porter Cable 12902 Riptide 10-Inch 80 Tooth ATB Thin Kerf Crosscutting Miter Saw Blade with 5/8-Inch Arbor Review

I received this product in 2 days from the date of order. I use it on my miter saw for cutting to install a hardwood floor. All cuts look clean and precise. The price was a good bargin.

Freud LU94M010 10-Inch 80 Tooth MTCG Plexiglass and Plastic Cutting Saw Blade with 5/8-Inch Arbor

Cheap Freud LU94M010 10-Inch 80 Tooth MTCG Plexiglass and Plastic Cutting Saw Blade with 5/8-Inch Arbor Review

The rock slide and well worth the price. I use ABS plastic and Plexiglas quite often and I can honestly say that this blade is far superior compared to the same narrow way of my 80 or 60 tooth Freud blade. I used 1 inch thick Lexan for his first try, no chips was very small fine shavings instead of chips plexi bit. This blade also very quiet. Overall I am very impressed by this product.

Hitachi C10FCE2 10-Inch Compound Miter Saw

Cheap Hitachi C10FCE2 10-Inch Compound Miter Saw Review

I spent most of the day using this saw to cut the amounts. In my experience, the manual is very confusing to understand. it seems to be written in English, but hey I do not know how to explain it's just really confusing. I went to Lowes to ask for a salesguy to help me use it but I actually thought of it using their display model. Apart from its actual use has been quite pleasant. first time using a miter saw and I watched some YouTube videos on safety, just make sure you cutevenly and let the blade stopping before pulling up. I do not know what happened, but the screw holding the clamp at the base would not screw all the way after I too wide to allow the other side. Perhaps the sawdust he slept, but I tried to blow and he was still stuck. Perhaps the sap got into it, anyway minor problem, but it happened. the included 24 tooth blade is acceptable to rip the studs. This was my first time and on a sidenote, an amount or 2x4 is not really 2 inches by 4thumbs as if I thought it would. newbie error. Perhaps the nail and 2x4 are 2 different things. if you cut a stroke, even gently, then slow down at the edge of the cup it seemed to minimize the outbreak of the small wood. I plan to buy a Freud blade for cleaner cuts molding. as someone mentioned it had a smooth start. for one reason or maybe he said it, but I was expecting a softer start. it is a good feature, but it seems sometimes abrupt. this is not really a negetive, just a kind thoughtyou do not have unrealistic expectations of what soft start means. I have not checked to see if the collection bag is dust as others have warned, but I have not noticed the dust is blown if the saw is not clogged with dust. Overall a good experience and I recommend this. I chose not to get one with the laser, but now I'm debating whether I should have one. this saw has a better view I had on that basis. a little trick I learned is that to obtain accuratecuts, lower the blade into the wood next to your pencil mark. Make sure your finger on the trigger crazy and use your finger to rotate the Blake then one of the teeth to the line connecting the mark. turn the blade on the smooth part of the blade where you are stupid enough to accidentally pull the trigger and a portion of your finger. I can eyeball the cut very precisely in this way, probably better than the laser but a laser is always something that sounds cool to have. anyway just my 2hundred is what I have in the first days of use.

Makita A-94758 10-Inch 40 Tooth Ultra Coated Mitersaw Blade

Cheap Makita A-94758 10-Inch 40 Tooth Ultra Coated Mitersaw Blade Review

Freud LU92M010 10-Inch 60 Tooth MTCG Ultimate Laminate Cutting Saw Blade with 5/8-Inch Arbor

Cheap Freud LU92M010 10-Inch 60 Tooth MTCG Ultimate Laminate Cutting Saw Blade with 5/8-Inch Arbor Review

The blade was very quiet during cutting and produces a totally clean cut. I used mostly cross-cut and some tear Pergo floor lamininate American Heritage. Had no chips at all.

Bosch CB1060 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5/8-Inch Arbor

Cheap Bosch CB1060 10-Inch 60 Tooth ATB Crosscutting Saw Blade with 5/8-Inch Arbor Review

Wilton 7020M 10-Inch 1-1/2 Horsepower Miter Metalworking Bandsaw, 115/230-Volt 1 Phase

Cheap Wilton 7020M 10-Inch 1-1/2 Horsepower Miter Metalworking Bandsaw, 115/230-Volt 1 Phase Review