Makita LS1013F 10-inch Dual Slide Compound Miter saw with Light

Cheap Makita LS1013F 10-inch Dual Slide Compound Miter saw with Light Review

Bought this on Amazon in April 2006. He replaced my tank type 10 "miter saw Milwaukee - the most accurate tool I ever used so far Makita arrived. Every time I use this tool, I fell in love with her again . So I thought I "owed" it a good review. I am not a professional trader, craftsman, carpenter, etc. - just an owner who gets too excited sometimes so over my head. I take a lot of wood perfectly well and convert 'em to sawdust and thresholds - but now Ido it with a big smile and with more precision than I deserve. If I had to choose a word for this saw - one - it would be good.

No. Make that SMOOOOTH place.

Being able to bevel and miter of both sides gives me confidence to tackle difficult cuts. I find myself enjoying that "something extra" bit of trim and finish work on all the work - it gives me an excuse to practice with this saw. I do things I would not even bother to try, if I did not have this tool. InBesides cutting performance and accuracy, it proved very versatile in my small garage shop because I can swing the saw around the place of wood (usually cedar dimension). capcity Nice - 4x4 Stck cup or 2x4 on edge with ease. My most difficult compound cuts so far? Attic Vents building custom pinion and mounting the coverslip strips (45 degree angle) into a chamber octagonal. The math angle was a bit of a challenge (!) But once calculated, the reductions were easy toset up and run on this saw - and died. Yeah, I know what you think: "gable vents? Gable Vents! Problem ..." Me too - until I got these multiple angle end cuts.

The saw is well designed and built with quality. No problems of 3-1/2 years (it is true) occasional use. The blade is excellent, with reductions similar to those of my table saw blade Forrest. Even with the great Amazon - free shipping, too - it was the second most expensive tool I have everpurchased (after my table saw). But I have never regretted. Not once.

Vows: second retaining clip would be nice (mine came with a clamp and two extensions). I am moving the clamp to the "other" side frequently. Like most Makita tools, accessories and parts are easy to find so I'll probably soon be a catch. Cheers!

Makita LS1013L 15 Amp 10-Inch Dual Bevel Sliding Compound Miter Saw with Laser

Cheap Makita LS1013L 15 Amp 10-Inch Dual Bevel Sliding Compound Miter Saw with Laser Review

I had this saw for several months. It is a powerful but quiet SILKY SMOOTH saw right.

It is surprisingly high due to the drag functionality. I had to move my work bench to welcome him.

Make sure you have ENOUGH behind the saw.

I regretted my choice and wish I had gone with a bevel compound as the Dewalt 716 until I had to cut 2x12 last weekend. The Makita went through them as if they were so 1 / 4 "plywood conscoated with peanut butter.

WOW GREAT lumberjack!

Obviously a decent blade for the saw.

I really like the separate switch for the laser, I can use to align my cup without running the saw.

NO Why five stars?

Dust is not great. I put an adapter instead of the dust bag and attached my Shop Vac. It helped, but the system of an empty bench near the top of the blade protection is still needed or perhaps a scoop at the rear ofsaw attached to a real dust collection system.

My saw arrived with a broken lever bevel. It is only a part of $ 4, so I decided to order me rather than a problem with Amazon or anyone else. I also wanted optional accessories.

There is virtually no barrier on the right side of the blade. However, there is a factory option available is complementary closing a horizontal flange.

I went to a shelter nearby who seems to specialize in Makita where they have abig screen and they had representatives on the plant site several times in the past. When the salesman looked at the closing price of the attachment clip and they almost had to call 911 to restart my heart. Together, they cost more than 1/4th of the price of the new saw.

Even if I have a scandal for the bevel lever and attachment to the right fence.

The wait for the bevel lever was approx. one week. Good service, good price for a 3 "piece of plastic.
A few months later 2 + attachment closing never happened. I hope this is not so, I made a homemade setting that works, but is not, of course, so pretty. But the fact is quite as nice and about $ 5 per square inch of the fence is a Makita littttle expensive if it happens EVER.

This is a great saw, but it scares me to think what will or will not occur if the saw crashes and I have to wait an essential and very important! The letters S - O - L aheadmind.

Makita LS1216LX 12-inch Dual-Slide Compound Miter Saw with Laser and S

Cheap Makita LS1216LX 12-inch Dual-Slide Compound Miter Saw with Laser and S Review

Makita A-93728 12-Inch 80 Tooth Micro Polished Mitersaw Blade

Cheap Makita A-93728 12-Inch 80 Tooth Micro Polished Mitersaw Blade Review

Purchased this blade to replace the stock blade on my DeWalt miter saw. I'm really impressed by the quality of the cut of the blade - glass smooth. I've now widely used for flooring and fir ply and it works perfectly in these materials. Really excellent value for money.

Makita 122536-0 Vertical Vice for Miter Saw LS1040

Cheap Makita 122536-0 Vertical Vice for Miter Saw LS1040 Review

Makita LS1220X 12-Inch Compound Miter saw

Cheap Makita LS1220X 12-Inch Compound Miter saw Review

I'll tell you now, I tried all the other saws on the market tabs, sliding compound miter miter and in all sizes, and this saw is the best. I think the sliding saws are more expensive and more-apt to run out of alignment and become bogged down in heavy materials. They also require dedicated workstations to make them as heavy as the radial arm saw you're probably replace. The 10 "compound miter saws, while more affordable, the lack of cutting ability and, frankly, are notGet the design and construction attention as the saws are more. The 12 "miter fall in the middle. (And the middle value is always the best). They're getting attention on the construction and design, as they aim to the contractor, they have a cutting capacity Decent and they are robust, but portable. I decided that of all other 12 "saws because it has a zero clearance throat plate (a must to remove detachable), triggers excellent tabs, and a strong engine. It also comes withExtensions stock (that work) as standard equipment. The blade upgrade is first class. I even bought a second for the LS1220 pro shop where I work. If you pay much, realizing it!

Makita A-94758 10-Inch 40 Tooth Ultra Coated Mitersaw Blade

Cheap Makita A-94758 10-Inch 40 Tooth Ultra Coated Mitersaw Blade Review

Makita LS1214F 15 Amp 12-Inch Dual Bevel Sliding Compound Miter Saw with Fluorescent Light

Cheap Makita LS1214F 15 Amp 12-Inch Dual Bevel Sliding Compound Miter Saw with Fluorescent Light Review

I would certainly rate this saw to the site. The soft-start function is very useful and fluorescent light is a must have. There are so may times when I am in a basement with little light and having to make cuts to cut something. The blade it comes with a blade amazingly gorgeous. The way this saw folds to proceed is by far the best of all the sliders, we used (ie: Bosch, Dewalt, Rigid, Hitachi). The only complaint I have is the index of the wedgetable, which is easy to get used to it, and it seems to hang a bit when the blade is fully extended to make a long cut and the fact that you do not get a wedge of 60 degrees, the sliders belt. It cappacity additional bevel is nice to have done the stairs. I saw with laser and feel they are overvalued anyone who uses one day has always created using the blade, it appears to me to be more precise. Also used with the laser and Makita and like this better.

Makita 7-1/2 -in 40T Crosscutting Miter Saw Blade A-90629

Cheap Makita 7-1/2 -in 40T Crosscutting Miter Saw Blade A-90629 Review

Makita A-94792 12-Inch 60-Tooth Ultra Coated Miter Saw Blade

Cheap Makita A-94792 12-Inch 60-Tooth Ultra Coated Miter Saw Blade Review

I am a stairbuilder and hardwood cut each day. This blade has survived everything else I've bought. it binds rarely. I just got as many lives of the blade as I do a tooth 80 and cutting nearly as clean. Well worth the money!

Makita A-93712 12-Inch 60 Tooth Micro Polished Mitersaw Blade

Cheap Makita A-93712 12-Inch 60 Tooth Micro Polished Mitersaw Blade Review

Whether you're a do-it-your-self or a contractor like me, you will not find better quality or more general-purpose 12 "blade. I bought an agreement Dewalt 2-pack and their 80 didn blade teeth 't far from the quality of the Makita. Needless to say that the Dewalt back. The blade is almost as good as Freud, but not quite. $ 31.00 for two thumbs up ...!!!!

Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade

Cheap Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade Review

Makita 721444-A 10-Inch by 6 Tooth Diamond Miter Saw Blade with 5/8-Inch Arbor for Fiber Cement

Cheap Makita 721444-A 10-Inch by 6 Tooth Diamond Miter Saw Blade with 5/8-Inch Arbor for Fiber Cement Review

Excellentblade of fibro-cement, such as Hardi-Board and much less expensive than the cost of the competition area.

Makita LS1221 12-inch Compound Miter saw Kit

Cheap Makita LS1221 12-inch Compound Miter saw Kit Review

UPDATE ****** ******

Of course, it had to happen. I wrote the original review below based on the Makita saw, I bought a number of years and a second that I bought for my workplace. I recently took another job and because of my experience with those saws, I bought another for the new store. Unfortunately, the saw came out of alignment. This does not happen often, but sometimes an issue at this price point. We have dedicated their efforts to align correctly but no matter howwe tried to adjust the fence, the saw can cut at 90 degrees. Our mechanic thinks it is due to oscillating blade caused by improper machining of the arbor. Even after putting an expensive, high-quality blade on it, it remains unclear. I guess it's a question of the draw, however, I can not recommend the precision saw to use more.

I'll tell you now, I have tried all the other saws on the market: miter, and sliding compound miter miter joint in all sizes,and this saw is the best. I think the sliding saws are more expensive and more likely to run out of alignment and bogged down in heavy materials. They also need dedicated workstations that make them as heavy as the radial arm saw you are likely to be replaced. The 10 "compound miter saws, while more affordable, the lack of cutting capacity and, frankly, does not receive the design and construction attention as the larger saws are. The 12" saws Mixed tabs are in the middle. (And in the middle, thevalue is always the best). They get attention to the construction and design because they are the contractor, they have a decent cutting ability, and they are robust, but portable. I chose one out of every other 12 "saws because it has a zero-clearance throat plate (a must to remove detachable), excellent miter detents, and a strong engine. It also comes with extensions of actions (which actually work) as standard equipment. The blade upgrade is top notch. I even bought a second for the LS1220professional shop where I work. If you'll pay much, report!

Makita 195083-4 WST01 Jobsite Miter Saw Stand

Cheap Makita 195083-4 WST01 Jobsite Miter Saw Stand Review