Forrest WW07Q307100 Woodworker II 7-1/4-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade

Cheap Forrest WW07Q307100 Woodworker II 7-1/4-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade Review

I have been building kitchen cabinets and furniture and a good amount of construction / renovation of more than 30 years. I tried several blades manufacturers and so far has been a loyal user of Freud. Well, all you need to do is to try one of these blades and you realize what you missed. The quality of the blade is first class, but more importantly, the quality of the cut is by far the best of any I've used.

I always used a zero clearance insert on my tablesaw anda basis of zero clearance on my 7-1/4 "circular saw for cutting free a tear. This blade produces a lot less tears even without a release device that zero incredible. I still use zero clearance devices when cutting plywood or laminates because I am a perfectionist, but you get the point. I now have these blades on my 10 "tablesaw, 7-1/4" circ and 12 "mitersaw. I also have a reinforcement of their blade on tablesaw ... you should get that too.

Forrest is now the only brand that Ibuy.

Forrest is the best - You get what you pay for!

Forrest WW07Q307100 Woodworker II 7-1/4-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade Feature

• Forrest Saw Blades dampener helps kill saw scream-whistle from a vibrating blade surface.
• Dampen out motor and belt vibrations from being transmitted up to the rim of the teeth.
• Greatly reduce cutting noise.
• Hold blade rigid and true for better cuts on your machine.
• Are hardened and precision ground flat within .001" to keep your blade true.

Forrest WW07Q307100 Woodworker II 7-1/4-Inch 30 Tooth 5/8-Inch Arbor 3/32-Inch Kerf Circular Saw Blade Overview

With this all purpose blade for tables saws you can rip and crosscut 1" 2" rockhards and softwoods resulting in a smooth-as-sanded surface. With 20 DEG face hook, ply-veneers will crosscut with no bottom splinter at moderate feed rates. Double hard and 40% stronger C-4 carbide will give up to 300% longer life between sharpenings. Ends blade changing (one blade does rip, combo and crosscut). Ends second-step finishing. Ends cutting 1/16" oversize to allow for resurfacing. Buy and sharpen one blade instead of 3, (24T rip, 50T combination, 80T crosscut).



*** Product Information and Prices Stored: Apr 24, 2010 15:41:11