Bench Dog 10-010 Crown-Cut Crown Molding Cutting Jig

Cheap Bench Dog 10-010 Crown-Cut Crown Molding Cutting Jig Review

This is probably the best article I could buy for our crown molding project. My wife and I are building our house with both hands. I was worried about installing the cornice with all the stuff you need to master to get a good job. The crown molding jig Bench Dog answering all questions simply with all the confusion associated with cutting the molding. I will say that I had an idea of someone else who bought the same template, itis a good idea to physically attach the jig saw. I drilled two holes in the vertical part of the template that matched the existing hole on the fence with my chainsaw. I'm using bolts with wing nuts, wing nuts, it is easier to move the template from left or right side depending on the easiest haircut you want.

Bench Dog 10-010 Crown-Cut Crown Molding Cutting Jig Feature

• Crown-cut crown molding cutting jig; fits all 10-inch and larger miter saws
• Fits all crown molding up to 6-inches wide; on-tool cutting guide for quick reference
• Baltic birch body doesn't damage blades, saw, or molding
• 1 jig included; miter saw not included
• 2 pounds; 2-year limited warranty; made in USA

Bench Dog 10-010 Crown-Cut Crown Molding Cutting Jig Specifications

There’s no denying that nearly everyone loves crown molding, but cutting the molding is no picnic—even for some pros. That’s because crown molding gets installed at an angle against the wall and ceiling, and precise cuts are required to obtain tight-fitting corner joints. Complicating the situation is the fact that crown molding is expensive; it only takes two or three miscuts to blow your budget. But don’t despair you can end the trepidation and frustration with the Bench Dog 10-010 Crown-Cut Jig. This surprisingly simple device provides a quick, foolproof way to cut crown molding, even for novice do-it-yourselfers.

Crown-Cut is designed to work with any 10-inch or larger power miter saw, and it’ll accommodate crown moldings up to 6 inches wide. The jig is made of Baltic birch plywood and it plastic stops and steel tabs that adjust to match the molding’s height and distance it projects from the wall.

To use the jig, simply set it onto the saw table and adjust it to match the molding size. Then place the molding into the jig and it’ll automatically be held at the proper wall angle. Set the saw blade to 45 degrees, and make the cut. This method is much easier than holding the molding flat on the table and setting the saw for a compound angle cut, which requires figuring out both bevel and miter angles. -- Joseph Truini

Bench Dog 10-010 Crown-Cut Crown Molding Cutting Jig Overview

Crown Molding Cutting Jig - CROWN MOLDING CUTTING JIG. Produces perfect fitting miters every time. Crown stop quickly adjusts to lock molding. Fits all 10" & larger miter saws



*** Product Information and Prices Stored: Apr 21, 2010 06:11:15