Makita LS1013L 15 Amp 10-Inch Dual Bevel Sliding Compound Miter Saw with Laser

Cheap Makita LS1013L 15 Amp 10-Inch Dual Bevel Sliding Compound Miter Saw with Laser Review

I had this saw for several months. It is a powerful but quiet SILKY SMOOTH saw right.

It is surprisingly high due to the drag functionality. I had to move my work bench to welcome him.

Make sure you have ENOUGH behind the saw.

I regretted my choice and wish I had gone with a bevel compound as the Dewalt 716 until I had to cut 2x12 last weekend. The Makita went through them as if they were so 1 / 4 "plywood conscoated with peanut butter.

WOW GREAT lumberjack!

Obviously a decent blade for the saw.

I really like the separate switch for the laser, I can use to align my cup without running the saw.

NO Why five stars?

Dust is not great. I put an adapter instead of the dust bag and attached my Shop Vac. It helped, but the system of an empty bench near the top of the blade protection is still needed or perhaps a scoop at the rear ofsaw attached to a real dust collection system.

My saw arrived with a broken lever bevel. It is only a part of $ 4, so I decided to order me rather than a problem with Amazon or anyone else. I also wanted optional accessories.

There is virtually no barrier on the right side of the blade. However, there is a factory option available is complementary closing a horizontal flange.

I went to a shelter nearby who seems to specialize in Makita where they have abig screen and they had representatives on the plant site several times in the past. When the salesman looked at the closing price of the attachment clip and they almost had to call 911 to restart my heart. Together, they cost more than 1/4th of the price of the new saw.

Even if I have a scandal for the bevel lever and attachment to the right fence.

The wait for the bevel lever was approx. one week. Good service, good price for a 3 "piece of plastic.
A few months later 2 + attachment closing never happened. I hope this is not so, I made a homemade setting that works, but is not, of course, so pretty. But the fact is quite as nice and about $ 5 per square inch of the fence is a Makita littttle expensive if it happens EVER.

This is a great saw, but it scares me to think what will or will not occur if the saw crashes and I have to wait an essential and very important! The letters S - O - L aheadmind.

Milwaukee 48-08-0450 Miter Saw Work Center

Cheap Milwaukee 48-08-0450 Miter Saw Work Center Review

I was kneeling on the ground for too long! I do a good amount of finish work. But always felt much of the stand and the cost of a decent unit was not worth it. Always pat the Dewalt stand in the center, but the tag near $ 200 was too high. I was wrong. The cost is less than the Dewalt. Not as cool as the extruded aluminum on the Dewalt. But well constructed of galvanized steel. I mounted my Dewalt saw to it without any problem. This is the same unit as proposed byanother manufacturer, but with the labels of Milwaukee. It went together in a snap and I was hooked after the first miter fit perfectly. No matter how you hold the longer pieces, or how you try and stack the debris of supporting cast. You always have the risk of slight variance in your tab. Just a fraction of the results seen in a huge gap on the wall. This unit is sturdy, galvanized, and folds easily. Nice Rides in the van, although you should save a chunk of floor forit. And as I noted in the comments of others ... Always love to buy Made in USA!

Woodhaven 4560K Angle Head Kit

Cheap Woodhaven 4560K Angle Head Kit Review

MITER SCALE RYOBI - RIDGID 89100207007

Cheap MITER SCALE RYOBI - RIDGID 89100207007 Review

Starrett CP505A-12 ProSite Combination Protractor

Cheap Starrett CP505A-12 ProSite Combination Protractor Review

I recently bought and just received the Starrett-12 CP505A angles. I heard poor reviews (online and work colleagues) on the cheaper models (505A and 505A-12-7) in terms of accuracy (especially since they are not exact due to the gauge decals be out of alignment from the factory). I spent extra for the PC version, because it has good reviews and is claimed to be laser engraved / embossed. Looking at the indicators, it appears that, although may be burned, they are still just pasted decalson the aluminum unless the aluminum underneath the sticker is engraved, but I'm not going to take off the sticker and ruin the tool $ 85 just to know. I think my point is that I am a bit disappointed after paying a premium to find that it seems that the metal is not written, just the sticker, which may peel or deranged. My concern justified? I probably would not have bought if only the labels have been cut and not the body itself. Otherwise, it seemsbe properly constructed and graduations are queuing.

MJ ZeroPlay Guide Bar System (2 Bars + 2 Stops)

Cheap MJ ZeroPlay Guide Bar System (2 Bars + 2 Stops) Review

Makita LS1216LX 12-inch Dual-Slide Compound Miter Saw with Laser and S

Cheap Makita LS1216LX 12-inch Dual-Slide Compound Miter Saw with Laser and S Review